If you’ve followed along on this series, we’ve finished work on the kirtle, outer gown, and foresleeves. Now, it’s time to indulge in all things dramatic and sparkly and wonderful: the plaquette. The plaquette is a stiffened panel that attaches to the front of the gown to hide the center front lacing of the gown while creating the smooth front characteristic of a Henrician gown.
The plaquette has a rounded shape on top and a pointed shape at the bottom and the sides should line up near the side seams of the gown bodice. It requires stiffening lengthwise to hold its general shape but needs to be moldable or soft widthwise to hug around the front body. Ideally, the kirtle and outer gown are providing all of the body shaping. So though the plaquette is stiffened, it’s for decorative purposes in the end.
The plaquette pattern is based on the bodice panels with the addition of 1″ at the center front, curved to either side to match the original side lengths. Additionally, the bottom is extended 1″ in order to overlap with the forebodies panels and elongate the torso.
It can be simple and smooth, elegantly embroidered, or heavy as heck with diamonds and rubies. I opted for a blend of all three. Because why not be extra?
In my mind’s eye of design, I initially wished to create the plaquette with embroidery with details of seed pearls and beading. Yet, the lace and embroidered pieces that were available to me at my local stores were far too modern for the design I wanted. I thought about teaching myself to embroider or commission a panel of embroidered material specifically, but I’d already far and above blown the project budget on the sheer yardage required gown. I couldn’t justify buying MORE material, no matter how much I wanted to indulge the desire for gorgeous fabric. Instead, I would use items I had in my stash for the project already.
You see, when I get an idea for a project, I turn into a crow. If I see something in passing that is even remotely related to the project on sale, clearance, or just THE perfect color, I buy it and stash it away in one of the many many baskets that take residence around my all-in-one living room/dining room/sewing room/guest room (basically the only room in the apartment besides my bedroom). Once the basket contains most or all of the inspirational materials I need, I start. Often this means I have more inspiration items than I need or use, but it leads to a wonderfully sorted creative process.
To build the plaquette from these materials, I start by deciding on the fashion fabric and structural layers. In all, I used four layers: the outer/front layer from blue velvet remaining from the outer gown construction, thin white muslin interlining, coutile, and blue linen for the lining.
Now, a bit of explaining on the layers. I didn’t come to this arrangement naturally, nor does it seem necessary in hindsight. To start, I actually had a layer of buckram in the middle at one point too. I attempted to use that layer to provide the structure necessary to give the smooth shape and hold up the gems I planned to add. However, on the trial run of the layers (baste stitched together), the buckram buckled and folded weirdly with any movement. It was…too stiff. So I eliminated it and planned to add a few bones to the plaquette to support instead.
Since I planned to add boning to the center (essentially acting as a busk) and following the top curved seam, I added the layer of coutil which would give me a base to add twill tape boning channels while preventing any stretching of the plaquette overall. We’ll come back to this thought.
The muslin layer is added for a lining structure for the thin weave and delicate silk velvet to be mounted on while I added trim, embroidery, beading, or whatever creative embellishments I landed on. I baste these two layers together first and can begin the embellishment process.
The first item I pull from my stash basket is a navy trim I purchased on clearance from Joann’s. I thought to use it to create geometric style lines to meld with the diamond patterns on the outer gown. I fiddled around with it for a while, pining in places, holing it up to myself in the mirror, and adjusting until I was happy with the effect. In the end, the shape creates a triangle or v-shape mimicking the point on the plaquette as well as the diamond effects.
Finally, was the most fun part of adding beads on beads on beads and gems and more gems! Unfortunately, I don’t have a lot of photos of the beading process since I was so excited and playing with it as I went that I just kept stitching and didn’t record any. Looking back though, my process started by sorting through the beads I had available and having any that coordinated nearby, then testing how certain patterns of beads would look in sequence. I took a sequence that I liked from the seed beads and couch stitched them in parallel along the center raised section of the trim.
And of course, I want crazy using gems to my heart’s content. Again, this was a process of trying patterns to see what I liked and what I had enough glass gems for to have a cohesive pattern.
Before moving on beyond the beading, I’d like to take a moment to appreciate the backside of the panel because I find it simply fascinating
Embellishments aside, it was time to add the structural layers and finish the piece. I placed my coutile on top of the finished beaded panel and traced the lines of the trim/beadwork under which I would add boning channels.
[what boning made it to the final garment]
The lining and coutile layers are basted together for stability. With all layers finished, the lining layer and outer layer are stacked with right sides together and are stitched, turned outward, pressed, and slip-stitched closed for a final finish.
The last step is to create a way for the plaquette to attach to the gown bodice. Historically, this was achieved with the use of straight pins that a lady’s maid would have used in dressing a noblewoman. But, it’s just me, and I like convenience. So I use a strong home decor thread to whip stitch one side of the plaquette to the gown and add hook and eyes to the other side. This was a tad of a process since my initial placement of the plaquette was not tight enough across the gown front and caused the hooks to, well, unhook when I moved. But the second time was too far apart and forced me to pull the gown front panels together when hooking. Third time was the charm and achieved the right tension. So don’t worry if it takes a bit of finagling to get it right.
There it is, the completed plaquette. And I adore it. Aside from the laughable weight of the outer gown, it’s my favorite part of the gown.
Crazy to believe, but we’re nearly complete with this project. Only one more item to build and she’ll be complete
After finishing the structure of the kirtle, I could begin the work of patterning and fitting the gown bodice. In terms of sequencing, I put some of the finishing and fancy work off for the kirtle to start the bodice. I like to do this so that I could have work in cutting, sewing machine, or hand sewing and switch between tasks depending on my mood at the time. For the bodice, I used the Henrician Gown pattern from The Tudor Tailor. The gown will require panels for the bodice including the center back, side back, side front, forebodies (center front panels that lace up), plaquette, large turn back sleeves including a contrasting lining, and skirt including the pleated front, side, and back panels. The bodice pattern is copied from the book and scaled (see my post here on how to scale book patterns) and I got lucky in that my measurements are fairly close to those of the pattern model, except for my waist measurement.
For the first mockup, I slashed the forebodies panel along where a waist dart would be and opened by 1 inch. I figured this would be adjusted with the mockup fitting but would give a good starting point for over the previously fitted kirtle. I also lowered the neckline on the forebodies and side front panels for the decorative panel on the kirtle which turned out wider than the original pattern.
The mockup actually when very well on the first attempt. There were only a couple adjustments I needed to make to the pattern, mostly related to contouring the opening to the waist, releasing the side seams a tad to open the armscye, and taking in at the shoulders. The most difficult part by far was the sleeves. Sleeves are the absolute devil and I went through 6 mockups of the sleeve caps to try and get the right shape that fits comfortably. To start, I could not seem to get the sleeve head to ease in without pleats or gathers while increasing the sleeve at the bicep to be unrestricted with a chemise layer underneath. I’m honestly still not happy with the sleeves but needed to move on.
For the skirt, there weren’t any fitting adjustments to make beyond reducing the length for my height. The model for the base pattern was about 6″ taller than me, so I opted to simply reduce the length of the skirt panels by 6″ and call it a day.
Final pattern in hand, I began the process of cutting out all the fabric. Here, things got a bit complicated. Now, The Tudor Tailor calls for 10 yards of material for making the gown (bodice, skirt, full sleeves, etc.). I meanwhile had 5 yards, but at 60″ width since it was a home decor fabric. In order to make it work, especially with a very geometric pattern to match, I got a bit creative. I start by laying all the skirt pieces out and using the match point at the waist on each seam for pattern matching. Right off the bat, I knew there was no way to have the skirts at their fullness of the original pattern with the amount of material available, even with the 6″ reduction in length for all pieces. To make it work, I adjust the skirt panels by:
The back skirt panel would only be the 60″ width of the material,
The side panels are slashed at three points and reduced with the side-back seam on the vertical of the fabric pattern (parallel with the selvage),
6″ width of the front panels would be supplemented by a 12″ strip of velvet and front-sides would not pattern match beyond the waist point match.
The slash and reduce method for the side panels is done by:
Marking three lines from the hem to waist as follows: one line parallel to the front-side seam, one line parallel with the side-back seam, and one line between the first two.
The lines are then cut from waist to hem, but not through the hem. I will often reinforce the scant paper left at the end of the slash with a bit of tape so it doesn’t tear through;
Pivot the slashed sections toward the front-side seam to close . . . . .
By reducing the volume of the side and front skirt panels, I give myself enough material to cut my bodice pattern pieces and part of the sleeves. The reduction of the side skirt panel at the waist line made me nervous that it would affect the historical shape of the skirt, but I actually really liked the reduced bulk at the hips. I’ll point this out in photos toward the end of this series.
In cutting the bodice panels, pattern matching was much more critical than in the skirt. The matching process starts with the center back panel that I opt to eliminate the center back seam entirely. I mark the panel on the fabric, using the yellow and red dots at the center of the diamond pattern as my center backline. I then mark a 1/2″ seam allowance line around the entire panel.
For the side back panel, I generally find an area of fabric large enough for the piece, with wiggle room for pattern matching and seam allowance. I then pin the center back panel to the fabric at the farthest edge and lay the side back paper pattern along the seam line. The paper is pinned in place here and marked with chalk, adding seam allowances. This gives me a perfect pattern match when stitched along the seam line precisely. Though, it was NOT easy with the limited material I had. I then had to repeat the process with even less fabric for the side front panels. This pattern matching and optimizing the fabric left for the bodice took me entire evenings. Plural.
And of course, the sleeves again are the absolute devil. I knew there would be absolutely no way to have enough material to fully make the sleeves in the geometric pattern and after noodling on it a bit, it didn’t seem necessary to do so. Since the sleeves would be the full turnback style, most of the “outer” fabric would be tucked behind the contrasting lining. So I took the remaining large section of geometric fabric I had and cut the sleeves to I had the sleeve cap and the longest length possible. It ended up that the length ended right at the point where the sleeve would start to curve outward, so all for the best. The remaining outer sleeve was then cut from the navy blue linen that was used for the kirtle construction. I also opted to use this linen for the forebodies panels since they would be covered by the plaquette. I also cut lining for the bodice from a satin I had on hand.
With everything cut (finally), I could begin the construction process. I start by flatlining all the panels using a basting stitch at 1/4″ from the edge and then finishing the edges on the serger. The panels are then carefully stitched together, checking the pattern match as I pin so that the hard work of pattern matching when I cut is not wasted. I stitched the panels from the center back to the center front. All in one piece, I can do a final fitting for the shoulder seams and move on to the eyelet closure. The 1″ excess at the center front is folded back, ironed, and pinned in place before stitching the boning channels. I am using 1/4″ synthetic whalebone (plastic) boning and thus stitch the first channel 3/8″ from the center front, move over 1/2″ for the eyelets, and then another 3/8″ for the second channel.
While using the iron to flatten the boning pieces, I also turn over the neckline seam allowance, iron, and clip to be sewn down by hand with simple whip stitches.
I used the top of sleeve cut pieces to also cut the lining from cotton and make a bottom of sleeve pattern for the remaining length. The bottom of the sleeve is cut from both the same blue linen as the forebodies and silk velvet. Though the linen is technically the outer layer and the silk is the lining, the sleeves will be folded back with the wrist at the elbow, thus hiding the linen and exposing the lush velvet. The velvet section is cut 1″ longer at the hem so that the velvet will fold over at the final hem rather than the seam being exposed.
The linings pieces and outer pieces are stitched together, tops to bottoms, then individually stitched at the underarm seams. Once all four sleeve tubes are stitched, the lining and outer layers are stitched together at the wrist hem and turned out to form the sleeve.
Next came the agonizing task of setting the sleeves into the armscye. The armscye is prepped by a quick stay stitch (basted stitch length) around the armscye. The sleeve itself has two lines of gathering stitches at 1/4″ and 1/2″ from the edge. The bobbin end of the gather stitches is pulled to gently gather the sleeve cap to help with easing the sleeve into the armscye.
The eased sleeve is pinned into the armscye using the markings from the original pattern for orientation. I hand-stitched the sleeves in place with small backstitches because I worried that forcing it through the machine would create puckers and tucks. Hand stitching takes longer but comes with a lot more control. The lining is then turned inward and also handstitched down at the armscye, encasing the finished sleeve seam.
The skirt panels were cut while preparing the bodice, but lining pieces also needed to be cut as well as the supplemental velvet. The supplemental velvet is cut to serve as both the 6″ reduction from the front panel as well as a lining. I am cutting a stip 13″ wide to allow for 1/2″ seam allowances.
I am adding a lining for the skirt primarily because the home decor fabric has an odd back where all the threads from the red and gold stitching are exposed. Knowing my clumsy self, I would end up hooking those threads all the time if they weren’t encased. The lining is cut using the previously cut outer fabric pieces as pattern templates. I used a mixture of bulk white cotton (Ikea) and clearance patterned cotton (Hobby Lobby). In hindsight, I wished I had used only the patterned cotton to be consistent since any time the bright white is seen, it is quite a shock next to the deep, rich blues.
The lining pieces are stitched together and seams pressed open.
As I was prepping the skirt panels to be stitched together, I realized I almost missed a golden opportunity: POCKETS. I quickly found a standard pocket pattern from another project and cut four pocket panels from the blue linen. I added these to the side-front seam edges of both the side and front panels and THEN stitched the full seams for the front, side, back, and front supplement pieces. Lastly, the velvet front panels are stitched to the front lining panels to create a full circle of the outer fabric and lining. The wrong sides are turned inward with both the hem and waist seams open. The waist seam for the outer and lining layers is pinned together, basted, and finished on the serger.
The Tudor Tailor pattern gives instructions for pleating and gathering the skirt waist, but I had to do a bit of adjusting due to my pattern reductions in the skirt and bodice alterations early on. I was able to follow the front panel pleats closely by marking the point where the pleats would meet based on The Tudor Tailor pattern, but then adjusted the starting point of the box pleats based on reducing the length to match the side seam on the bodice. I also added a small pleat in the velvet strip so that the box pleat wasn’t quite so extreme. This pleat is also marked in The Tudor Tailor pattern. The pleats were basted in place before stitching the bodice and skirt together from front to side seam. This seems counterintuitive to do before finishing the back pleats, but it allowed me to then place the bodice and skirt on a dress form and play with the back panel pleats to figure out the right ratio for the cartridge pleats.
The side and back panels of the skirt are gathered with cartridge pleats to give fullness at the hips and butt that were characteristic of the period. I used 1″ pleats at the sides and 3″ pleats at the back and then both were wiggled and squished to give an even appearance across the back.
The pleats are fixed to the bodice with small whip stitches using heavy-duty upholstery thread. Because my skirt is constructed of heavy home decor fabric and lined with a full cotton layer, is un-godly heavy and I worried that the weight would cause the waist seam to pull apart if I didn’t use small enough stitches.
With the skirt fully stitched to the bodice, I placed the garment on the dress form adjusted it to my height, and leveled the front hem to skim just above the toes. Since the back skirt includes a small train, I only leveled the hem to the side-front seam. The side and back hem was just tidied up to match at the seams and left long for the train.
To finish the hem, I am using the same silk bias ribbon as from the kirtle hem, though needing twice as much length. I quickly make my bias tape, and pin it to the front of the skirt, being careful that the lining will be caught in the stitches and hang straight with the outer layer. The bias tape is stitched to the front using the machine, turned under, and hand-stitched to the lining.
It was so incredibly satisfying to see the outer gown come together. The construction was actually pretty quick once I had gotten past the pattern-matching finicky work. It is heavy as heck but by far one of the most well-done, professional-looking garments I have ever made. There is still the plaquette and accessories to finish, but it was such a wonderful moment to be able to see the full garment both on the dress form and then to wear it myself. At this point, the project has been ongoing for nearly a year and a half.
The foundation garment for gowns in the 16th century, otherwise known as the Tudor Era, was the kirtle. The structured garment precludes the bodies that were characteristic of the Elizabethan Period, stays from the 17th century up until the advent of the corset in the 19th century onward. The kirtle can be a structured bodice coupled with a petticoat or underskirt that would serve as the window panel for dresses like the Henrician lady’s gown or fashionable French Gowns. In the case of the underskirt, the structured bodice and skirt were joined to make one garment.
Historically comprised of tightly-woven linen and whalebone, the structured bodice created the shape of the period: low, square neckline; lifted bosom; and straight, angled waist. For my kirtle, I use the pattern provided by The Tudor Tailor book.
I transferred the pattern pieces using parchment paper and then scaled using a 1:8 scale as instructed by the book. Fortunately for me, the provided pattern is nearly my base measurements already (bust, waist, hip) but I did end up taking the pattern in by 1″ at the side seams and adjusted the shoulder straps quite a bit from the mockups. I also noted that the pattern would be at least 6″ too long and would address that later when cutting the skirt.
By this point, I had decided to use the navy blue, geometric fabric from the original project for the over-gown and wanted to combine this with a yellow and burgundy floral patterned upholstery fabric I had from a yard sale. The yellow/gold and burgundy/red in the floral pattern was the exact shade of colors as the center of the diamond pattern of the blue fabric and would complement nicer than the silvery gold geometric I originally planned to pair. In addition, the floral was close to being a damask pattern that would’ve been fashionable for the Tudor period. The only flaw in this thinking is that in most reference paintings for the project (see image above), the geometric pattern was usually in the window panel and accents while the floral/damask was used as the main fabric. I was really pleased with the combination though and planned to roll with it.
For the kirtle bodice, I used a mixture of fabrics to give the correct structure and look. The fashion side of the bodice is pieced with navy linen I had on hand ($6 for 6 yards at a rummage sale, score!) and the red/gold floral fabric at the neckline to match the window panel of the skirt. Since the linen was actually quite lightweight and I worried about the integrity of it once boning was added, I interfaced the pieces with scraps of tightly woven cotton. Finally, the interior of the bodice made use of heavy-weight tan linen from a drapery clearance.
The bodice is constructed of a front and back with the straps extending from the back to the front. I opted for two side closures rather than a single back lace-up since it would allow me to lace myself into the garment. The side closures also will allow the garment to adjust size easier. I cut the panels in the blue linen, minus 2″ for the pieced neckline, plus 1/2″ for seam allowance. The 2″ strip of floral was then cut and stitched in place.
To finish off the back panels, two 1/4″ boning channels were added at the center back and one on each side seam to support the eyelets that would be added.
The boning structure on the front panel was a bit more complicated. The front is fully boned (or cord if you prefer) under the bust. I used the grid from The Tudor Tailor pattern to plot out the bust curve and edge of the boning sections by marking the center of the front panel and then marking outward equivalent to the ratio on the grid (1 grid = 1″). The grid was also used to determine the bottom location of the angle lines.
With the outlines in place, the boning channels were stitched based on a 1/4″ spacing offset from the center and two angles, creating three distinct boning sections:
I was actually shocked by how flexible the bodice was with this method. Since all of the bones are vertical, or at a slight angle, the bodice wraps nicely around the front of the body. It provides a good stomach structure and bust support without feeling cinched in. Surprisingly comfortable!
With the panels and boning finished, the straps were stitched to the front panel and all edges were surged to prevent fraying. There was a bit of finessing the fit of the straps when stitching in place and I found using a mannequin much faster than on myself. Nest, I added a strip of navy piping to the neckline edge before folding all the edges over and whip stitching down by hand.
The side seams have spiral lacing with 1/4″ embroidered eyelets. I spaced the eyelets 1″ apart and used bright contrasting burgundy embroidery floss for the stitches. Why not add a pop of interest, they would be covered by the overgown anyway.
Structure completed, it was time to add some shine to the bodice. The area of the kirtle with the pieced floral fabric would be visible under the main gown. In paintings I looked at, the kirtle has a row of gems, pearls, or other embellishments along this area.
The skirt of the gown is relatively simple, and yet a place I made many errors. I had very little of the floral patterned fabric to work with; however, since I am short, I was able to cut back on the required yardage significantly. Perks of being fun-sized! I also did a bit of patching to make it work. Little did I know when cutting, that I had accidentally cut the piece on the fold with the fold going the wrong way. Luckily, the bottom hem is relatively square, but the seam with the bodice is not and this caused a lot of issues with how the skirt hangs. Even with cutting back to create the point, it still isn’t quite right. But, I only had just so much fabric and had to make it work.
The second major mistake was fabric choice for the unseen portion of the skirt. The yellow floral fabric is very stiff, and I needed something of similar weight so it wouldn’t get all funky. I chose a “linen-look alike” drapery fabric that I thought was on clearance at Joann. A lesson to check labels carefully. The roll I had grabbed was on sale, but the backup the sales associate grabbed when the first roll ran out, was not. I ended up paying full price on not-so-great quality fabric. It did its job, but certainly didn’t look or feel as good as it should’ve for the price. I often use fabrics not for their intended purposes (upholstery for apparel for example), but they are usually similar enough and the only way to get the look I want at the price point I can justify. I should’ve taken my time and found the right material rather than settling for the first thing that was slightly doable and then regretting it as soon as I cut it out.
Overall, the fabric was too heavy. Stitching the two fabrics together was no problem, but once the back of the skirt was pleated, stitching to the bodice was a hand-breaking nightmare.
The front and back panels are stitched together up to approximately 8″ below the waistline. The skirt and bodice are stitched together by machine using heavy upholstery thread again to support the weight of the skirt. The areas left open on the side seams of the skirt allow the wearer space to get in and out of the gown as well as the addition of pockets in the future.
Skirt stitched to the bodice, the garment is hung on Molly the mannequin and the hem is leveled to hit at the ankle bone. This is a bit high for the period, but my reduction in height and forgetting to account for seam allowance at the waist brought my hem higher than brushing the toes. In the grand scheme, this is likely for the best since I’ll be less likely to trip on the front hem now. To finish the hem, I create bias tape from a navy silk ribbon found at Joann’s on clearance. It is probably the most expensive bias tape I’ve ever used in my life, but it looks absolutely flawless when applied. To conserve the use of this material, I switch to a polyester satin blanket binding for the hem along the tan linen section of the skirt.
And that is it! After some careful pressing of the waist seam, surging of the last unfinished seams and lacing up the side seams, the foundation garment is complete. With this, the over-gown can be fit tested and work can start there!
My sewing journey began because I wanted to make my own costume for Rennissance Faire and then grew and developed to be a lifelong skill I am developing with each project. But this project is one I envisioned wanting to do since I brought home my first sewing machine: a Tudor Gown.
I LOVE historical dramas for the stories, the drama, and of course the costumes. After watching The Tudors, I really wanted to wear the sumptuous gowns from the show. This initially materialized as my first attempt in a green gown following Butterick B4571. Not a terrible pattern to learn from, I made this gown in 2016/2017 and was only my second full garment. But looking back, its a terrible construction and mockery of the true gown design I was craving.
At the time, I loved the gown. I loved the amount of spin, the color, the fabric (all clearance from JoAnn’s or Hobby Lobby!), the fit. But I look at it now after a few years of learning and laugh. It was a step though, and I was proud of it then, that’s all that matters. First off, it’s all one garment. No underlayers, overskirt, chemise, nothing. Again, an easy pattern for theatre or Halloween costumes, but not to par with what I wanted.
Fast forward to January 2020. I had moved to a new town less than 45 minutes from the Bristol RennFaire and I desperately needed a costume upgrade. I found a blue, geometric pattern upholstery fabric from Hobby Lobby on clearance for $4 a yard, began designing, and purchased a cheap theatrical costumes textbook to pull a pattern from.
I was a bit skeptical on the book since it included only three sizes to start from, but it was at least a place to start after some research. In reading other blogs and watching CosTube videos, I plotted out that I would need at least 4 layers:
Kirtle or Bodies
I also was deciding on if I would like to include a hoop skirt or use added fullness. I decided to draft an elliptical hoop skirt in case I wanted to give it a try.
I’ll save everyone the overkill explanation of drafting these patterns, building three iterations of the bodice mockup, and building the kirtle using cheap polyester satin taffeta. In summary, it was a fit and quality failure.
The bust was too tight, the waist too large; the shape did absolutely nothing to highlight my figure or give the correct historic shape; the neckline was too high, but also too wide; and the material felt completely wrong. But I had stubbornly kept working at it trying to make it work. I added gems. I adjusted the fit. I tried adding a corset underneath to promote the right shape. Nothing was right and I was throwing money at a project I wasn’t prepared for.
And then the pandemic hit. All festivals were cancelled. And I lost every ounce of motivation to fix it. The pattern, fabric, and failed kirtle were shoved in a basket and thrown in a closet to be forgotten.
It took a year before I began working on this dream of a project again. In the meantime, I started this blog, I made The Goose Girl, I developed my skills, and most importantly, I took the time to read, study, and research. The best resources I found in restarting the project was the book, The Tudor Tailor. I 100% credit them for everything that this project became and the confidence that I had to try again.
In reading the book, all in a blissful winter night in January, I had a better understanding of the style lines and materials that were appropriate to recreate the designs in portraits from the period, not just what I’d seen on TV. I went back to the drawing board and purchased new materials for all the elements of the kirtle and gown. It also helped that by then I had successfully built a set of stays, bodies, and corset and was thus much better prepared for working with boning and structure that was needed for the kirtle.
The new design would be build from the Henrician Lady’s Gown pattern from The Tudor Tailor, would be supported by a kirtle, and finished with a French hood. I initially planned to skip the hoop skirt and go for fullness instead.
With a renewed spark of inspiration and passion to see the garment come together, I successfully patterned, fit, and constructed all parts of the design and am excited to share them here over the next few posts. Each layer of the garment will have its own dedicated post, but you can reference back here for links to them as they are published. I may split the gown up between a couple posts since it had the most elements and construction factors, but we will see.
Please join me on this wild ride of a second attempt that went from wrinkled fabric in June to a wearable garment in September.